HOLIDAY NOTICE: ORDERS DURING THE SPRING FESTIVAL HOLIDAY OF JAN. 14TH TO JAN. 29TH WILL BE SHIPPED SEQUENTIALLY FROM JAN. 30TH. THANKS FOR YOUR SUPPORT!

Replacement Guides RSS

Introduction   Step 1 Blu-ray Disc Drive If present, remove the pieces of tape securing the cables to the body of the Blu-ray drive.   Step 2 Be sure you are prying up on the movable retaining flap, '''not''' the socket itself.Use the flat end of a spudger or your fingernail to flip up the retaining flap on the Blu-ray ribbon cable socket.Be sure you are prying up on the movable retaining flap, not the socket itself.   Step 3 Pull the Blu-ray ribbon cable straight up and out of its socket.   Step 4 Pull the Blu-ray power cable...

Read more

Introduction Use this guide to replace your heat sink. It is essential to apply a new layer of thermal paste during reassembly.   Step 1 Top Cover Carefully peel the warranty sticker up off the lower case to reveal a hidden screw cover. Turn the PS3 over and lay it on its backside. Carefully peel the warranty sticker up off the lower case to reveal a hidden screw cover. To avoid activating the VOID that may come up, heat the sticker carefully to remove and replace it cleanly.   Step 2 Use the flat end of a metal spudger to...

Read more

Introduction Use this guide to replace your PlayStation 3 Slim's SATA hard drive.   Step 1 Hard Drive Remove the blue Phillips screw hidden under the access door.Turn the PS3 over and lay it on its backside.Use the flat edge of a metal spudger to pop up the small access door on the bottom cover near the front of the PS3.Remove the blue Phillips screw hidden under the access door.   Step 2 Slide the hard drive bay cover toward the right side of the lower case, then pull it away from the front edge to remove it from the...

Read more

Introduction If you want to replace the fan or clean the fan system - video tutorial:   Step 1 Fan system     Disconnect the fan cable and remove the nine screws from the bottom side.   Step 2   Remove the two heat sink clamps and bottom shield, then gently separate the motherboard off the top shield.   Step 3   Remove the four Phillips screws and lift the top shield.   Step 4   That's all. [br] Please SUBSCRIBE to my channel ツ   CONCLUSION To reassemble your device, follow these instructions in reverse order.   Author ZFixMember since:...

Read more

Introduction Reading the PlayStation 3 Super Slim Teardown will introduce the inner workings of the Playstation 3 Super Slim and an in depth look at the motherboard. The instructions for the replacement of the antenna itself can be found starting at Step 19. PlayStation 3 Super Slim Teardown   Step 1 PlayStation 3 Super Slim Teardown HD 1080p, 1080i, 720p, 480p, and 480i output Primed and ready to bare all and prove its worth, the PlayStation 3 Super Slim packs a lot of power in a super compact form factor. Notable specs include: HD 1080p, 1080i, 720p, 480p, and 480i...

Read more