Replacement Guides RSS

  Introduction Use this guide to replace your PlayStation 3 Slim's CR 2032 coin-cell PRAM battery.   Step 1 Top Cover Carefully peel the warranty sticker up off the lower case to reveal a hidden screw cover. Turn the PS3 over and lay it on its backside. Carefully peel the warranty sticker up off the lower case to reveal a hidden screw cover. To avoid activating the VOID that may come up, heat the sticker carefully to remove and replace it cleanly.   Step 2 Use the flat end of a metal spudger to pry up the seven screw covers...

Read more

  Introduction Use this guide to replace your power supply.   Step 1 Top Cover Carefully peel the warranty sticker up off the lower case to reveal a hidden screw cover. Turn the PS3 over and lay it on its backside. Carefully peel the warranty sticker up off the lower case to reveal a hidden screw cover. To avoid activating the VOID that may come up, heat the sticker carefully to remove and replace it cleanly.   Step 2 Use the flat end of a metal spudger to pry up the seven screw covers around the edge of the lower...

Read more

Introduction Use this guide to replace the plastic lower case of your PlayStation 3 Slim.   Step 1 Top Cover Carefully peel the warranty sticker up off the lower case to reveal a hidden screw cover. Turn the PS3 over and lay it on its backside. Carefully peel the warranty sticker up off the lower case to reveal a hidden screw cover. To avoid activating the VOID that may come up, heat the sticker carefully to remove and replace it cleanly.   Step 2 Use the flat end of a metal spudger to pry up the seven screw covers around...

Read more

  Introduction Use this guide to replace the plastic lower case of your PlayStation 3 Slim.   Step 1 Top Cover Carefully peel the warranty sticker up off the lower case to reveal a hidden screw cover. Turn the PS3 over and lay it on its backside. Carefully peel the warranty sticker up off the lower case to reveal a hidden screw cover. To avoid activating the VOID that may come up, heat the sticker carefully to remove and replace it cleanly.   Step 2 Use the flat end of a metal spudger to pry up the seven screw covers...

Read more

Introduction PlayStation 3 - How to replace Laser Lens and Mechanism (Laser Deck).   Step 1 Laser Unit (Laser and Mechanism)   Disconnect all cables. You have 4x Torx T8 screws and 7x Phillips screws. Now you can remove outer case.   Step 2   Remove Power Supply.   Step 3   Separate cables, unscrew the screw and remove the Blu Ray drive.   Step 4   Disassemble the upper metal shield. Please SUBSCRIBE to my channel   Step 5   Remove the two very small phillips screws in each lower corner referenced by the red circles.   Step 6...

Read more