May 17, 2017

Xbox One Wireless Controller Faceplate Replacement

Introduction

There are several screws located on the back of the controller that you need to remove, in order to take the faceplate off.

Step 1 Battery Pack
Image 1/1: Remove batteries.
Remove the battery pack cover.
Remove batteries.

Step 2 Side Handles
Image 1/2: Grip the controller firmly to remove the side handles, wedging a spudger into the seam between the front and handle plates. Image 2/2: Pry the side plate away from the front plate by moving the spudger back and forth. You will need to do this all the way around the side plate's seam.

We recommend using a nylon spudger for this step. A metal spudger is shown.
Grip the controller firmly to remove the side handles, wedging a spudger into the seam between the front and handle plates.
Pry the side plate away from the front plate by moving the spudger back and forth. You will need to do this all the way around the side plate's seam.

Step 3 Screws
Image 1/2: Use a screwdriver and punch a hole directly in the center of the label.

There is a hidden screw located in the middle of the controller behind the label.
Use a screwdriver and punch a hole directly in the center of the label.
You may also lift the label if you do not want to puncture it.
Remove the five 10mm screws located on the back of the controller using the T8 Security Torx Screwdriver.

Step 4 Backplate

Image 1/1:
Remove the backplate.

Step 5 Faceplate

Remove the faceplate.

Author
Tommy
Member since: 01/22/2015
724 Reputation
4 Guides authored