Xbox 360 S Hard Drive Replacement

Main guide photo

Introduction

There is no such thing as too much hard drive space, and nothing more frustrating than too little. This guide will show you how to replace your Xbox 360 S hard drive.

Step 1 Hard Drive
Image 1/3: Push the latch holding down the hard drive cover to the left.Image 2/3: Pull the hard drive cover away from the console.Image 3/3: Pull the hard drive cover away from the console.

Orient the Xbox 360 S so that the bottom of the console is facing toward you.
Push the latch holding down the hard drive cover to the left.
Pull the hard drive cover away from the console.


Step 2
Image 1/3: Pull the hard drive straight out of the console.Image 2/3: The fabric tab is attached to a catch further inside the hard drive housing. It will take some force to pull the hard drive out.Image 3/3: The fabric tab is attached to a catch further inside the hard drive housing. It will take some force to pull the hard drive out.



Firmly grasp the fabric tab labeled "250 GB" attached to the hard drive.
Pull the hard drive straight out of the console.
The fabric tab is attached to a catch further inside the hard drive housing. It will take some force to pull the hard drive out.

Author
Brett Hartt
Member since: 04/12/2010
95,715 Reputation
187 Guides authored


0 comments

Leave a comment

Please note, comments must be approved before they are published