Introduction
Use this guide to remove the plastic top cover.
Step 1 Top Cover
Carefully peel the warranty sticker up off the lower case to reveal a hidden screw cover.
Turn the PS3 over and lay it on its backside.
Carefully peel the warranty sticker up off the lower case to reveal a hidden screw cover.
To avoid activating the VOID that may come up, heat the sticker carefully to remove and replace it cleanly.
Step 2
Use the flat end of a metal spudger to pry up the seven screw covers around the edge of the lower case.
Step 3
Remove the seven 37 mm Phillips screws securing the top cover to the lower case.
Step 4
Remove the four 13.3 mm T8 security Torx screws beneath the Blu-ray drive opening. (Some models may only have three screws)
Step 5
Lift the top cover off the PS3.
Lift the top cover from its rear edge and rotate it toward the front of the PS3.
Lift the top cover off the PS3.
CONCLUSION
To reassemble your device, follow these instructions in reverse order.
Author
868 Guides authored
