PlayStation 3 Slim Laser Unit (Laser and Mechanism) Replacement

Introduction

PlayStation 3 - How to replace Laser Lens and Mechanism (Laser Deck).

 

Step 1 Laser Unit (Laser and Mechanism)


 

Disconnect all cables. You have 4x Torx T8 screws and 7x Phillips screws. Now you can remove outer case.

 

Step 2


 

Remove Power Supply.

 

Step 3


 

Separate cables, unscrew the screw and remove the Blu Ray drive.

 

Step 4


 

Disassemble the upper metal shield.

Please SUBSCRIBE to my channel

 

Step 5


 

Remove the two very small phillips screws in each lower corner referenced by the red circles.

 

Step 6


 

Be careful with flex cables.

 

Step 7


 

Now you can remove the Laser Deck.

 

Step 8


 

Transfer two flex cables and 2x rubbers.

 

Step 9


 

You can test the console before full assembling.

Did you do it successfully?

Please SUBSCRIBE to my channel

 

CONCLUSION

To reassemble your device, follow these instructions in reverse order.

Author

ZFix
Member since: 12/09/2013
122,367 Reputation
343 Guides authored


0 comments

Leave a comment

Please note, comments must be approved before they are published