Introduction
If you want to replace the fan or clean the fan system - video tutorial:
Step 1 Fan system
Disconnect the fan cable and remove the nine screws from the bottom side.
Step 2
Remove the two heat sink clamps and bottom shield, then gently separate the motherboard off the top shield.
Step 3
Remove the four Phillips screws and lift the top shield.
Step 4
That's all.
[br] Please SUBSCRIBE to my channel ツ
CONCLUSION
To reassemble your device, follow these instructions in reverse order.
Author
ZFix
Member since: 12/09/2013
122,367 Reputation
343 Guides authored