Introduction
Replacing your DSi's battery only requires a Phillips #00 screwdriver and a thin prying tool.
Step 1 Battery
The screws remain captive to the battery cover.
Unscrew the two Phillips screws securing the battery cover to the lower case.
The screws remain captive to the battery cover.
Grasp the battery cover and lift out of the lower case.
Step 2
Grasp the battery and remove it from the DSi.
Wedge the edge of a spudger in between the top of the battery and its lower case housing and pry upwards to dislodge the battery.
Grasp the battery and remove it from the DSi.
Author
Walter Galan
482,143 Reputation
1,962 Guides authored
