Disassembling Xbox 360 E Top Panel

Introduction

This guide is a prerequisite for replacing other parts of an Xbox 360 E.

Step 1 Top Panel
Image 1/1: Pull back on the spudger like a lever, keeping it pressed firmly into the crevice.
Push the Spudger into the crevice between the grated top panel of the Xbox and the bottom body with the rubber feet.
Pull back on the spudger like a lever, keeping it pressed firmly into the crevice.

Step 2

Image 1/1: Periodically pull back on the spudger like a lever, keeping it pressed firmly into the crevice.
Slide the spudger along the separation you have created between the grated panel and the bottom body of the Xbox.
Periodically pull back on the spudger like a lever, keeping it pressed firmly into the crevice.

Step 3
Image 2/3: Pull the top panel off.



Continue sliding the spudger along the perimeter of the left grated face of the Xbox.
Pull the top panel off.

Author
Jennifer
Member since: 02/02/2014
1,286 Reputation
4 Guides authored


0 comments

Leave a comment

Please note, comments must be approved before they are published